The new MDX-D810, for the Nikon D810, has newly designed controls and is compatible with the Optical YS Converter.

Optical YS Converter/N can be built into the housing

Compatible with new Optical YS Converter/N1 for MDX housing which converts the camera’s TTL signal to a light signal. Both TTL and manual strobe photography is possible using a Fiber-Optic Cable II.

Compatible with both the VF180 1.2x and VF45 1.2x viewfinders

By attaching the VF180 (#46112) or the VF45 prism viewfinders (#46111) (magnification ratio of 1.2x) to the housing, the magnification increases by 1.2x and entire field of view can be seen at the same time. Recommended for users committed to strict composition and focusing.

Luminescence stickers

Major controls including levers and buttons will glow in dark environments.

Equipped with movable Focus/Zoom gear

When the focus/zoom dial is pulled out, the gear inside the housing will move outward allowing for lenses with large diameters to be easily mounted.

Main dials are equipped with damper (spring)

The main command dial, the sub command dial, shutter release mode dial and diopter adjustment dial have a damper (spring) to provide secure operation. (Controls on the cameras will not slip because of the damper.)

Three ergonomically improved levers

A new design for the shutter lever, AF mode lever, the AF-ON lever, and the movie-record lever has improved the levers ergonomic shape.

Diopter adjustment dial

The camera's diopter adjustment dial can be operated from the housing.

Features:

• Equipped with two fiber-optic cable sockets.
• The housing has two accessory ports. One is designed for N-type strobe connector and the other one is designed for HDMI output.
• The port lock is accessible from the outside of the housing.
• The camera's lens-lock release button is accessible from the outside of the housing.
• The multi selector has been positioned on the right side of the rear case making it easily accessible while holding the grip and operating the camera.
• The camera's built-in flash can be activated and deactivated from the housing. (Only when the accessory light-shielding plate is not in use).
• Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to avoid electrolysis damage.
• Three mounting screw holes are located in the bottom of the housing.
• Equipped with the Optical Viewfinder 0.5x as standard. 0.66x and 0.8 may be used as an option.
• Built-in leak sensor immediately alerts you to water ingress.
• A depth rating of 100m / 330ft makes the housing ideal for tech diving.

User Manual for MDX-D810(5.7MB)

• Housing
• Leak Sensor
• Housing body cap
• Fiber-optic cable socket cap (x2)
• Light shielding plate
• O-ring remover
• Silicon grease
• Hex wrench (6mm / for grip dismounting)
• Hex wrench (3mm / for Lanyard bolt)
• User manual
• 1 Year warrenty

Sea&Sea MDX Port Finder for Nikon