Allows for the attachment of a Modular 8-inch Dome to any Ikelite Housing for a Compact dSLR or Mirrorless camera. The 8-inch dome is specially designed for underwater photography and injection molded out of optical grade acrylic. The diameter of the dome provides sharper photos corner-to-corner, while the large surface area of the dome makes shooting over-unders (half-in, half-out of the water) easier.
The dome needs be very close to the front of the housing to provide the best images possible with super wide angle lenses. The proximity of the port to the housing precludes the use of zoom function when using this adapter. Lenses must be used at a fixed focal length.
Modular 8-inch Dome sold separately.
Compatible Mirrorless lenses
* Minimal vignetting (shadows in the corners of the image) will be present due to the ultra-wide angle of coverage.
Compatible Compact dSRL lenses
* This lens has what's called a Limit Switch that keeps the lens from being used wider than 10mm. That is because the lens naturally vignettes below 10mm when used on a APS-C sensor, like that of the Canon EOS 100D Rebel SL1. This lens can be used at 8mm, but will vignette. This vignetting is caused by the sensor and not the dome/shade.
Mirrorless(MIL) Port System
An interchangeable lens camera demands a housing with interchangeable lens ports. It couldn't be more simple to change ports than this sytem—just press the port on and tighten three thumb screws. Feel positive reinforcement that the port is secure without any complex moving parts that can jam or break in a remote location.
|Function / Efficiency|
|Depth rating||60m / 200 ft.|
|Port Mount||Ikelite DLM Mount|
|Materials||ABS resin + Acrylic glass|
|User Manual||Download User Manual|
These recommendations are suitable for all Compact Mirrorless Housings with product numbers in the 6900-series for the following cameras:
These port recommendations are NOT suitable for use with the 4-lock port system as found on Ikelite's standard dSLR housings with product numbers in the 6800-series.
These port recommendations are NOT suitable for use with housings for the following cameras: