INON SD Mount Base for Olympus TG-Tracker
INON SD Mount Base for Olympus TG-Tracker INON SD Mount Base for Olympus TG-Tracker INON SD Mount Base for Olympus TG-Tracker INON SD Mount Base for Olympus TG-Tracker INON SD Mount Base for Olympus TG-Tracker INON SD Mount Base for Olympus TG-Tracker INON SD Mount Base for Olympus TG-Tracker INON SD Mount Base for Olympus TG-Tracker INON SD Mount Base for Olympus TG-Tracker
INON SD Mount Base for Olympus TG-Tracker
Mfr# 456212143835
Our Price: $74.95
Availability: In Stock
Qty:  
   - OR -   
  • Easy to install to snap it in front of the camera and fix with a tripod screw on the bottom.
  • Equipped with INON SD Mount bayonet system to support easy and speedy exchange as well as reliable installation of compatible SD Mount lenses.
  • INON Direct Base III, Z Joint or Z Adapter MV can be attached on the bottom of this product.
  • Packaged Male Adapter enables to attach SG-T01 Steady grip which comes with the TG-Tracker or GoPro compatible mount on the bottom of this product.
  • Packaged Mount Adapter for SD Mount Base/SD Front Mask STD enables to add one INON D Holder on this product in 3 ways (right/left/back).
  • This Mount Adapter further enables to attach the SD Mount Base for TG-Tracker on a tripod or monopod.

Compatible lens and recommended shooting distance
  UFL-G140 SD Underwater Semi-fisheye Conversion Lens
   -Recommended shooting distance: 1cm /0.4in to 80cm/2.6ft from lens surface. (*5)(*6)(*7)
  UCL-G165 SD Underwater Wide Close-up Lens
   -Recommended shooting distance: 2cm /0.8in to 15cm/5.9in from lens surface. (*5)(*6)(*8)

Sample image with/without INON attachment lens
UFL-G140 SD
Shooting without the lens less than camera’s minimum focusing distance (20cm/7.9in) away from a subject results in out of focus as in the left image while using the UFL-G140 SD lens taken at same distance delivers crispy subject and captures wide area.
(Recommended shooting distance: 1cm /0.4in to 80cm/2.6ft from lens surface)

Left: Without attachment lens        Right: With UFL-G140 SD Underwater Semi-fisheye Conversion Lens
Screen shot from video clip 1080p(30fps), Field of View: Underwater Wide, WB: Sunny, Image stabilization:Enabled

UCL-G165 SD
*Shooting without the lens less than camera’s minimum focusing distance (20cm/7.9in) away from a subject results in out of focus as in the left image while using the UCL-G165 SD lens taken at same distance delivers crispy subject and captures slightly wider area.
(Recommended shooting distance: 2cm /0.8in to 15cm/5.9in from lens surface)

Left: Without attachment lens Right:        With UCL-G165 SD Underwater Wide Close-up Lens
Screen shot from video clip 1080p(30fps), Field of View:Underwater Wide, WB:Sunny, Image stabilization:Enabled

(*1) Contact Olympus Imaging Corp. for detail of camera. INON Inc. confirms product compatibility based on a camera available in Japan.
(*2) SD Mount Base for TG-Tracker is designed to use with "UP-T01 Underwater Protector" and [Underwater wide] mode is chosen on the camera. Not compatible to use with "LP-T01 Lens Protector" for land photography.
(*3) Significant vignetting on image corners even without attachment lens on land in any shooting mode/field of view setting. No vignetting underwater.
(*4) Built-in headlamp of the TG-Tracker is not usable as this product covers it. Make sure to turn off the headlamp while using the camera with this product.
(*5) It is recommended to use compatible attachment lenses within recommended shooting distance.
(*6) Activate image stabilization function of the camera while shooting video to avoid vignetting. When taking still images, do not use attachment lens to avoid significant vignetting on image corners.
(*7) This lens is designed only for underwater use. (When using on land, distant subject is not in focus, angle of view is not as wide as rated and vignetting will be observed)
(*8) This lens is designed only for underwater use. (When using on land, vignetting will be observed)


Function / Efficiency
Underwater Weight 45g / 1.6oz
Compatibility
Wet Lenses INON SD
Basic
Dimensions 65.4 x 65.4 x 94.7mm / 2.6 x 2.6 x 3.7 in
Weight 78g / 2.7oz
Materials Polycarbonate, POM etc.
Warranty 1 Year

 

SSL Certificate EV SSL
Copyright © 2013 DiverVision U/W Photo Equipment All Rights Reserved