Ikelite DL Housing for Canon EOS 7D Mark II dSLR
Ikelite DL Housing for Canon EOS 7D Mark II dSLR Ikelite DL Housing for Canon EOS 7D Mark II dSLR Ikelite DL Housing for Canon EOS 7D Mark II dSLR Ikelite DL Housing for Canon EOS 7D Mark II dSLR Ikelite DL Housing for Canon EOS 7D Mark II dSLR
Ikelite DL Housing for Canon EOS 7D Mark II dSLR
Mfr# 71708
Our Price: $1,599.95
Availability: In Stock
Qty:  
   - OR -   

Featuring the new Dry Lock (DL) port system. Vacuum valve included. TTL circuitry sold separately. Lens port and zoom gear sold separately.

Lens Ports

The single most important upgrade is Ikelite long awaited new Dry Lock (DL) port system. This exciting new system is even more robust and even easier to assembly than Ikelite time-tested Four Lock (FL) system. The new ports are lighter and more adaptable, and can accommodate extremely large diameter lenses with ease. If you're considering shooting professional quality lenses like the Canon EF 16-35mm Type II/III or the Canon EF 11-24mm, then the DL system is essential.

Most popular zoom lenses and select lens focus rings can be engaged using a simple yet effective gearing system that puts adjustment right at your fingertips. A large, soft-touch lobed knob on the side of the housing makes fine tuned adjustments a breeze. Zoom and focus gears differ depending on which lens you are using. All are lightweight and affordable. Refer to the DL System Port Chart to choose the correct gear. Zoom gears sold separately.

Due to differences in mount diameter and zoom engagement, DL and FL system ports cannot be used interchangeably. The DL port mount may be removed and replaced with old style port locks for legacy users with standard or modular ports from Ikelite Four Lock system. This modification will prevent the use of newer DL ports. The housing cannot be converted back and forth repeatedly. Re-installation of the DL port base will require the housing to be returned to Ikelite or an Authorized Dealer and may incur additional service charges.

Vacuum System

The included vacuum valve allows you to vacuum test the housing to check for leaks prior to putting your expensive equipment in the water. Combined with a full view of the camera and o-ring seal through the back of the housing, there is no greater assurance that your gear will be safe. Ikelite signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel. Use of the vacuum valve requires a compatible Vacuum Pump with Gauge # 47011, sold separately.

TTL Exposure

This housings supports your choice of shooting all manual or adding TTL electronics depending on your application. Ikelite new modular electronics system allows the housing to be updated with future strobe communications products as they become available. The flash bulkhead has been moved to the top of the case for improved cord routing and reduced strain. Reliable locking connectors between the hotshoe and bulkhead make it easy to install the optional TTL electronics or carry back up parts when traveling to remote locations.

You can still enjoy the fastest and most accurate TTL exposure on the market by adding the CT1K Canon TTL Kit # 46070 and a compatible Ikelite DS strobe. Exposure compensation can be used added or subtracted in the camera.

Controls and Set-Up

In addition to the more ergonomic zoom control, we've also upgraded the all-important shutter and AF-ON levers to a more natural feeling curved design. Both controls can optionally be extended using the Shutter Trigger Extension # 4077.93 for more comfortable use when using a right-hand quick release handle.

Even Ikelite push buttons have been redesigned to reduce weight and salt build-up. The back of the housing features laser engraved control symbols which will never fade or fall off.

The camera mount is now front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.

Viewfinders

The included Supereye Viewfinder provides an enhanced view of the camera's optical viewfinder when viewed through a dive mask. The viewfinder removes quickly and easily for the attachment of an optional Straight Magnified Viewfinder # 6890 or 45° Magnified Viewfinder (Type 2) # 6891.2.

Handling & Travel

Overall the housing is over 1/2 pound lighter than its former FL counterpart (housing model # 6871.08). If you're shooting an 8" diameter dome, you'll save an additional 1 3/4 pounds by using the DL version instead.

Ikelite new hard anodized aluminum base with quick release handle has also been streamlined for travel and is over 3/4 pound lighter than Ikelite previous DSLR tray and handle system. The Right-Hand Quick Release Handle # 4077.02 (sold separately) can be added or removed depending on how you want to shoot. The precision machined aluminum base features 1/4-20 tripod mounting sockets and additional mounting locations for future accessories. Plus, the base and handle can be quickly removed when breaking down your system for travel.

A 1/4-20 threaded mounting point is located front and center on the housing above the lens port mount. This mount can be used to attach lightweight accessories like a focus light or GoPro camera.

If you're shooting with two strobe or lighting arms, then a top handle can be added to make the system easier to carry to and from the dive site. Top handles are available in a Cable Grip # 4080.07 or Aluminum Top Handle # 4080.08. The rigid aluminum version provides additional mounting points for lighting and accessories.

Construction

Ikelite new white ABS-PC blend front is stronger than its clear counterpart, provides improved contrast and visibility, and keeps your camera running cooler in the sun. Like its predecessor and all of Ikelite housings, this product is made in the USA, individually inspected for fit, and water pressure tested to 200 feet (60m).

* Camera and port is not included.

Function / Efficiency
Controls All important camera functions.
Internal Flash No
Depth rating 60m / 200 ft.
Underwater Weight Near neutral in freshwater
Electrical (Sync. connector) Ikelite ICS-5
Optical (Sync. connector) No
Compatibility
Cameras Canon EOS 7D Mark II
Strobes Included Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes.
Optional TTL accessories provide automatic exposure with compatible Ikelite DS strobes
Tray Two 1/4-20 thread with 3.5in (90mm) spacing
Basic
Spare O-Ring Ikelite O-ring #0132.61
Dimensions 9.5 x 7.1 x 6.5" / 241 x 180 x 165mm
Weight 4.9 lb / 2,200g
Materials Polycarbonate, ABS, clear plate glass, EPDM
Warranty 1 Year
  1. Housing
  2. Rear O-Ring # 0132.61
  3. Front O-Ring # 0132.45
  4. Base with Left-Hand Quick Release Handle # 4077.67
  5. Port Hole Cover # 0200.92
  6. Zoom Gear Retainer # 75900
  7. Tool for Zoom Gear Retainer # 0945.06
  8. Waterproof Bulkhead Cap # 9104.5
  9. 1/16" Hex Key # 0945.16
  10. 1/8" Hex Key # 0945.18
  11. Control + Push Button Tip Assortment # 9249
  12. Silicone Lubricant 1cc Tube # 0184.2
  13. User manual
  14. 1 Year warranty

 

SSL Certificate EV SSL
Copyright © 2013 DiverVision U/W Photo Equipment All Rights Reserved