Ikelite TTL Housing for Olympus OM-D E-M10 Mark III M4/3 Camera
Ikelite TTL Housing for Olympus OM-D E-M10 Mark III M4/3 Camera Ikelite TTL Housing for Olympus OM-D E-M10 Mark III M4/3 Camera Ikelite TTL Housing for Olympus OM-D E-M10 Mark III M4/3 Camera Ikelite TTL Housing for Olympus OM-D E-M10 Mark III M4/3 Camera Ikelite TTL Housing for Olympus OM-D E-M10 Mark III M4/3 Camera Ikelite TTL Housing for Olympus OM-D E-M10 Mark III M4/3 Camera Ikelite TTL Housing for Olympus OM-D E-M10 Mark III M4/3 Camera
Ikelite TTL Housing for Olympus OM-D E-M10 Mark III M4/3 Camera
Mfr# 6950.13
Our Price: $1,149.95
Availability: In Stock

Available Options

Housing's Tray:

Qty:  
   - OR -   

A professional grade, compact waterproof housing for Olympus OM-D E-M10 Mark III mirrorless micro four-thirds cameras. Perfect for any application in or around the water from scuba to surf to pool.

The Olympus OM-D E-M10 Mark III is a powerful compact interchangeable lens camera. Customizable controls, a TTL flash hotshoe, and a titling LCD screen make it a good choice for underwater use. The E-M10 Mark III features a 16MP CMOS sensor, 4K/UHD video at 24p and 30p, and a 121-point contrast-detect AF system.

DLM Port System

An interchangeable lens camera demands a housing with interchangeable lens ports. It couldn't be more simple to change ports than this sytem—just press the port on and tighten three thumb screws. Feel positive reinforcement that the port is secure without any complex moving parts that can jam or break in a remote location.

True TTL Advantage

Other housings simply waterproof your camera. An Ikelite TTL housing improves your photos. TTL or "Through-The-Lens" flash metering means the camera controls flash duration to properly expose an image. Our built-in proprietary circuitry tells your camera that a TTL external flash is attached, allowing the camera to adjust exposure more accurately than with slave TTL strobes.

Fiber optic slave flash units require the camera's flash to fire every time. This creates a shutter lag as you wait for the camera's flash to recycle in between shots, drains your camera's battery life, and builds up heat inside of the housing. Ikelite electronics translate direct electrical impulses from your camera, triggering your strobe and precisely adjusting its power without the need to fire the camera's flash. This eliminates the slave TTL strobe issues of signal interference, inconsistent exposure due to weak fiber optic transmission and false triggering caused by light rays bouncing off the water's surface or your buddy's flash going off.

The camera's built-in flash is not usable in this installation. Non-Ikelite strobes may be attached with the appropriate sync cord and operate non-TTL (manual exposure modes only) with this housing.

* Port and Camera is not included.

 

Function / Efficiency
Controls All important camera functions are accessible
Internal Flash No
Depth rating 60m / 200 ft.
Underwater Weight Near neutral in freshwater
Electrical (Sync. connector) Ikelite TTL ICS-5
Optical (Sync. connector) No
Compatibility
Port Mount Ikelite DLM Mount
Cameras Olympus OM-D E-M10 Mark III
Strobes Ikelite conversion circuitry built in to the housing provides true TTL exposure connected to Ikelite DS Substrobes.
please refer to accessories.
Tray Two 1/4-20 thread with 3in(76mm) spacing
Basic
Spare O-Ring Ikelite O-ring #0110
Dimensions 7.37 x 6 x 5.5" / 187 x 152 x 139mm
Weight 3.7 lb / 1,691g
Materials Polycarbonate, ABS, Optical grade acrylic dome, EPDM.
Warranty 1 Year
User Manual  Download User Manual 
  1. Housing
  2. Silicone lubricant 1cc tube
  3. User manual
  4. 1 Year warranty

 

SSL Certificate EV SSL
Copyright © 2013 DiverVision U/W Photo Equipment All Rights Reserved